|
Our Sun Awnings are designed to be simple to install. We currently do not offer an installation service ourselves but if it is something that you do not carrying out yourself
then a local builder would find it very easy stright forward.
In principal the installation of any of our Sun Awning range is extremely simple and you will find a link to isntallation instructions on each individual product page on this site.
The Carino Awning Installation (Full Cassette)
The Carino Awning is provided with fixing plates that are bolted to your wall. One at either end of the Sun Awning.
For widths over 4.5m a centre plate is provided. Once the plates haved been fixed to the wall the awning is simply hooked on and screwed in place.
The Phoenix & Porta Awning Installation (Standard & Semi-Cassette)
The Phoenix and Porta Awnings require 4 fixings, two at either end. Mark the desired position on the wall and drill the 4 holes. Srew the top fixing into the holes and mount the Awning and tighten. Insert teh lower fixings and tighten.
All of our Sun Awnings come with complete installation instructions that include diagrams as well as handy tips
If you are having an electric awning then you will need to route the cable to a suitable plug socket and/or switch.
Each Patio Awning that we manufacture is fully set up in our factory so there is nothing further required for you to do. However, if you want to make your own adjustments to the angle, full isntructions can be provided.
|